NESPRESSO

Vertuo Pop Nespresso Coffee Machine

"
Nespresso Coffee Machine

Standing at 25 cm, Vertuo Pop makes a big statement by going small. One button is enough to activate the best in every cup. Each capsule is analyzed thanks to a code to finely adjust brewing parameters. The centrifusion extraction system then enhance the aromas of each blend. Espresso, double espresso, gran lungo, mug… Get ready to be spoiled for choice.

Includes: Vertuo Pop Pod Machine, Drip Tray, 12 Pods & Manual
GUARANTEE: 2 years
Weight: 3.5kg
Cleaning:
1. Rinse and clean the water tank and the lid before filling it with fresh drinking water. Put the water tank in place.
2. Rinse the cup support. Place a container of at least 34 fl oz. / 1 L under coffee outlet.
3. Open the machine head and let the used capsule be ejected. Empty and rinse the capsule container and the drip tray.
4. Close the head and turn handle left until “LOCKED” position. Please make sure no capsule is present in the machine before doing the cleaning.
5. Light will blink while the machine is heating up. Steady light indicates the machine is ready.
6. Wait for the machine to complete heating up. The light will be steady white. Push the button 3 times within 2 seconds. The button will blink quickly during the procedure. It will take less than 2 minutes before a flow comes out. The cleaning procedure will run automatically for 7 minutes.
7. The procedure can be stopped at any time by pushing the button. The button will go to a steady light. In case you want to resume the cleaning process, push the button again. To brew a coffee, open the head and insert a capsule, then close, lock the machine by turning the handle left and push the button.

Descaling:
1. Empty the drip tray and the capsule container.
2. Fill the water tank with 1 unit of Nespresso descaling liquid and add 17 fl oz. / 0.5 L of water.
3. For an optimized heating time, close and lock the machine to turn the machine ON. If the machine is already closed and locked, turn the machine ON by pressing the button.
4. Blinking light indicates the machine is heating up. When the light is steady, the machine is ready.
5. Open the machine head and let the capsule be ejected.
6. Reclose the machine and leave the lever in """"UNLOCKED"""" position, towards the front of the machine.
7. To enter the descaling mode, hold the button for at least 7 seconds.
8. The button will start blinking rapidly. You now have 45 seconds to enter descaling mode by following the next steps, otherwise the machine will return to the ready for brewing coffee mode.
9. Lock the machine by turning the lever left to the lock symbol and unlock by turning right. Hold the button for at least 7 seconds in """"UNLOCKED"""" position.
10. Place a container (minimum 34 fl oz. / 1 L) under the coffee outlet.
11. To start descaling, lock the machine by turning the lever left to locked symbol and push on the button. The machine will stop automatically when the first phase of descaling is completed.
12. Empty and rinse water tank, drip tray and cup support thoroughly.
13. Fill the water tank with fresh drinking water.
14. When ready, push the button to rinse the machine. Machine will stop automatically when complete.
15. The button will stop blinking rapidly and become steady. Descaling is completed. Allow the machine to dry for 10 minutes before using it."