Not available for delivery to Hong Kong SAR ChinaAIRPULSE
AirPulse A80 Active wireless speakers
$5,600.00
Price includes taxes & duties
Colour:
Quantity: 1
1
You may also like
Recommended for you
Horn Loaded Ribbon Tweeter
The A80 horn-loaded ribbon tweeter continues in the tradition of the flagship 7001 near-field monitor speakers. The thin aluminium ribbon diaphragm has high sensitivity, superb transient response, extended frequency range, and well-defined resolution, perfect to meet any music you play head on. The meticulously formulated horn shape produces directional and optimized high frequencies from the ribbon tweeter, so they are aimed at the listeners, minimizing unwanted effects from room reflection. This also leads to superior imaging of the speaker. The result is unequivocally full and three dimensional sound with each detail well defined.
4.5” Aluminium Cone Ferrit Magnet
The Mid-woofer is a 4.5” unit with a hard anodized aluminum alloy cone suspended in a heavy, ultra rigid cast magnesium alloy frame. The proprietary aluminium alloy cone was designed through a meticulous process analysing different types of cone geometry and materials using a Klippel Laser Doppler Interferometer. The 35mm diameter voice coil is larger than most loudspeakers of this size. It has been shown that larger voice coils have less power compression because they run at a cooler operating temperature. Sonically this means a more realistic dynamic representation of the music. It is dynamics in music that gives it emotion and exhilaration. The cooler running temperature of the voice coil also has the side benefit of a more reliable loudspeaker since cooler voice coil means much less chance of speaker failure.
Fully Digital Amplifier
The power amplification part is built with 2 pieces of TAS5754 Class-D amplifier from Texas Instruments. This component is one of a handful of Class-D amplifiers on the market which combines high input sample rate support and high output PWM carrier frequency. These two characteristics are essential to achieve low background noise and low distortion. The up-to 192 KHz input sample rate support guarantees the entire link for digital processing run without any change in sample rate signal. Its 768 KHz output PWM carrier frequency, double the typical 384 KHz found in traditional Class-D amplifiers, is more suited to driving the highly sensitive ribbon tweeter. One TAS5754 is connected in bridge mode to the left and right channel woofer while the other amp is connected in bridge mode to the left and right channel ribbon tweeters.
The A80 horn-loaded ribbon tweeter continues in the tradition of the flagship 7001 near-field monitor speakers. The thin aluminium ribbon diaphragm has high sensitivity, superb transient response, extended frequency range, and well-defined resolution, perfect to meet any music you play head on. The meticulously formulated horn shape produces directional and optimized high frequencies from the ribbon tweeter, so they are aimed at the listeners, minimizing unwanted effects from room reflection. This also leads to superior imaging of the speaker. The result is unequivocally full and three dimensional sound with each detail well defined.
4.5” Aluminium Cone Ferrit Magnet
The Mid-woofer is a 4.5” unit with a hard anodized aluminum alloy cone suspended in a heavy, ultra rigid cast magnesium alloy frame. The proprietary aluminium alloy cone was designed through a meticulous process analysing different types of cone geometry and materials using a Klippel Laser Doppler Interferometer. The 35mm diameter voice coil is larger than most loudspeakers of this size. It has been shown that larger voice coils have less power compression because they run at a cooler operating temperature. Sonically this means a more realistic dynamic representation of the music. It is dynamics in music that gives it emotion and exhilaration. The cooler running temperature of the voice coil also has the side benefit of a more reliable loudspeaker since cooler voice coil means much less chance of speaker failure.
Fully Digital Amplifier
The power amplification part is built with 2 pieces of TAS5754 Class-D amplifier from Texas Instruments. This component is one of a handful of Class-D amplifiers on the market which combines high input sample rate support and high output PWM carrier frequency. These two characteristics are essential to achieve low background noise and low distortion. The up-to 192 KHz input sample rate support guarantees the entire link for digital processing run without any change in sample rate signal. Its 768 KHz output PWM carrier frequency, double the typical 384 KHz found in traditional Class-D amplifiers, is more suited to driving the highly sensitive ribbon tweeter. One TAS5754 is connected in bridge mode to the left and right channel woofer while the other amp is connected in bridge mode to the left and right channel ribbon tweeters.
Ref: R03862440
- Tweeter: Horn Loaded Ribbon Tweeter
- Mid-Woofer: 4.5 inch Aluminum Cone 30mm VC Mid-Woofer
- Amplifier System: Digital Amplifer With Xmos Processor
- Power Output: L/R(Treble):10W+10W, L/R(Woofer): 40W+40W
- Frequency Range: 52Hz-40KHz
- Signal-Noise Ratio: L/R:≥90dB(A)
- Input Mode: AUX, PC, USB, Optical, Bluetooth (The USB, Optical Inputs Support Up to 192KHz Input Sample Rate)
- Input Sensitivity: AUX:450±50mV PC:550±50mV, USB:400±50mFFs, Optical:400±50mFFs Bluetooth:500±50mFFs Sub Out：1200mV Max
- Mains Voltag: AC 100-240 V /50-60 Hz
- Cabinet Size (WxHxD): 140x250x220mm
- Net Weight: 9.3 Kg(20lbs)
Delivery To Hong Kong SAR China
Sorry, this product is unavailable for Hong Kong SAR China Delivery
International Delivery
- Selfridges+ UK:
unlimited deliveries for a year$110.00 - Delivery to the UKfrom $65.00
Complimentary UK Click & Collect
Sorry, this product is unavailable for UK Click & Collect
Complimentary returns
It's ok if you change your mind - we offer a 14-day returns policy from the day you purchased your item in store or if you ordered the item online, just let us know within 14 days from the day you received or collected your order and you will have a further 14 days from notifying us to return it. Exceptions do apply, we unfortunately can't accept returns on all items.
Taxes and duties are included in the item price but are non-refundable.
Please read our terms & conditions to find out more.
GLOBAL
$800.00
- Unlimited UK timed, nominated day and standard delivery on orders over £100
- Unlimited worldwide deliveries subject to minimum order values
- Minimum order value of £100 (or local currency equivalent) when shipping to: Austria, Belgium, Bulgaria, Canada, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Guernsey, Hong Kong, Hungary, Ireland, Italy, Jersey, Kuwait, Latvia, Lithuania, Luxembourg, Macau, Malta, Netherlands, Poland, Portugal, Qatar, Romania, Saudi Arabia, Singapore, Slovakia, Slovenia, Spain, Sweden, Switzerland, Taiwan, Thailand, UAE, UK, USA
- Minimum order value of £300 (or local currency equivalent) to all other Selfridges delivery destinations. Check applicable countries in our terms & conditions
- Valid for 12 months from the day you subscribe or from the day you renew your subscription
UK
$110.00
- Unlimited UK timed, nominated and standard delivery
- Next day UK delivery (if ordered by 10pm UK time)
- Complimentary returns
- Valid for 12 months from the day you subscribe or from the day you renew your subscription